If you have a sofa with a broken arm, don’t worry, it can be fixed! Here is a step-by-step guide on how to do it:
- Remove the screws from the bottom of the arm using a screwdriver.
- Lift the arm off of the sofa and set it aside.
- Use a wooden board to make sure your Sofa Upholstery Dubai is level and put the arm on top of it. Set it back on the sofa frame. Ensure that all parts line up with each other where they are supposed to meet. Place wood blocks at the base of the arm so that the arm sits flush against the side of the couch.
- Secure everything into place with screws or clamps, then use wood glue to keep things secure while you wait for it to dry before doing anything else.
- After waiting 24 hours for your glue to dry, use a drill bit slightly smaller than your screw size to drill pilot holes straight through the center of every hole in both arms where they meet on either side of the couch.
- Drill screws into the arms, making sure they are tight against the sofa.
- Use a saw to trim off any excess wood sticking out from the bottom of the arm.
- Replace all screws removed in steps one through four.
- Enjoy your repaired Sofa Upholstery Service in DUBAI!
How to fix a split seam on your sofa?
Sofas are expensive pieces of furniture. That’s why it is vitally important to make sure you take good care of them, especially the seams. The seams are where all the parts come together and hold your sofa together. If you want to avoid spending money on a new sofa then you need to fix that seam before it becomes too much of a problem.
Here are the steps you need to take to fix a split seam on your sofa:
- First remove the cushions from the sofa. This will give you easier access to the seam.
- Once the cushions are removed, take a look at the seam and see how bad the damage is. If it’s just a small tear then you can probably fix it with some simple sewing techniques. However, if the seam has completely split open then you’ll need to do a bit more work.
- If the damage is only a small tear, then use some thread and a needle to sew up the tear. Make sure you use a sturdy thread that can hold up against wear and tear.
- If the seam has split open then you need to use a strong adhesive such as gorilla glue to seal it back up. Spread the adhesive over the seam and let it dry for several hours.
- Once the adhesive is completely dry, put your sofa back together and sit on it carefully until all of the parts fit together naturally.
If you follow these simple steps, you’ll be able to fix your broken sofa in no time! And it will look just like new when you’re finished. So don’t worry, there is no need to go out and buy a new one – just fix the one you have! 🙂
