Mold Is collected from the surface or from the air. This is a mechanism which is used to find out the nature of mold that exists in the air or the surface which is tested. You need to make sure that your home is devoid of excess molds, either in the air or on the surface.
Air samples
There are multiple different ways by which air samples can be taken. The most popular one to be used is known as spore trap sampling. In this process, a certain volume of air is passed through a sticky surface and collects the mole Ann deposit’s them in the sampling device.
Surface samples
There are three different ways that are used to carry out surface sampling for molds. There as follows.
- Bulk samples: A certain section of the sampled area is removed physically and is then sent to the laboratory for mold testing.
- Tape samples: In this mechanism, a piece of tape is used, which is pressed and then removed from the target area. This helps to pick up and remove any mold that is present on the surface. Later on, the piece of surface is sent to the laboratory for further tests.
- Swab samples: advanced mold testing is quite similar to the process that is used for DNA sample collection. Here a piece of cotton is used to rub on the surface which needs to be tested. Then, that piece of cotton is test sent to the laboratory for further testing and analysis.
These are the three main types of surface mold testing mechanisms that are used. It needs to be mentioned in this regard that the process of surface testing is more easy then collecting samples from the air. It is very important that it is carried out so that the suspended mold particles in the air that are invisible to the eye can be detected and removed
Why mold testing is necessary?
If the interior of your house contains mold that is higher than normal, in that case, it can very quickly and badly affected the walls and floors of your home. Besides, there are chances that you could end up having serious health issues. In the following section, you will be offered a brief insight as to why you need to carry out mold testing.
- One of the reason as to why mold testing is important because it gives you an idea about the moisture that is present in the air. Too much of moisture in the air can not only spoil the walls, at the same time, it can also prove to be quite harmful for your health. With the help of a proper and advanced mold testing, you would be able to figure out the percentage of moisture that is present in the interior of your home.
- Excessive amount of mold can spread quite quickly, and can damage the structure of your home. However, this can be prevented by mold testing.
- If you have an asthma patient in your home, or somebody with other kinds of breathing problems, for them, presence of mold in the home can prove to be quite damaging. If regularly inhaled, mold can cause serious blockage in the nasal passage, which can result into serious health issues. Besides, according to the experts, mold can also be quite detrimental as far as the health of your lungs is concerned.
Do you need an expert?
If you are planning to test your home, and you live in or around any industrial area, in that case, it would be advisable to go for both air and surface mold remediation specialists. As a matter of fact, given the fact that air pollution has increased at a tremendous rate, going for an air sampling won’t be a bad idea.
By now, you must have realised that mold testing is a mechanical process that involves lots of technicalities. Therefore, you would need an expert who has the skills, equipment and the knowledge to test the surface or the air of your home for molds. Are you looking for one? If you are, in that case, you can find quite a few options available these days. If you’re not quite sure why to find the best one, in that case come all you need to do is to run a search over the Internet. You will find many different options to go with.
Looking for an expert? The following contact might help.
Sunbird Carpet Cleaning Plantation
Phone: 954-302-2863
Dispatch Point: 1521 NW 100th Way, Plantation, FL 33322
